Best Laptop For Mastercam in 2020 (+Buying Guide)

DailyTechCentral is reader-supported. As an Amazon Associate, we earn a small commission for qualifying purchases.

Finding the best laptop for Mastercam can be a little difficult considering the number of options you have at your disposal.

Mastercam is a resource-hungry application and it will need some premium hardware to get things done smoothly. If you pick a mediocre laptop, then your Mastercam experience will be ruined forever.

We don’t want to waste your valuable time in researching and finding the best laptop. That’s why we’ve done that for you. No more useless chores.

Without wasting any more time, the best notebooks for Mastercam are as follows.

Lenovo ThinkPad P53
(Editor’s Choice)
  • 15.6″ FHD
  • Intel Core i7
  • 24GB DDR4
  • 512GB SSD
GigaByte Aero 15
(Runner Up)
  • 15.6″ UHD
  • Intel Core i7
  • 16GB DDR4
  • 512GB SSD
Acer Predator Helios 300
  • 15.6″ FHD
  • Intel Core i7
  • 16GB DDR4
  • 512GB SSD

Best Laptops For Mastercam

The best notebooks for Mastercam are

Best Laptop For Mastercam – Editor’s Choice

Lenovo ThinkPad P53s

  • Intel Core i7
  • 15.6″ Full HD
  • 24GB DDR4
  • 512GB SSD

We earn a commission if you click this link and make a purchase at no additional cost to you

The Lenovo ThinkPad P53 is our Editor’s Choice for the best laptop for Mastercam.

The Lenovo ThinkPad P53 model is a workstation laptop that comes with hardware that is meant for some serious work. This is not your gaming laptop hardware but something that is targeted at professionals.

One of the most important distinctions here is the use of the Nvidia Quadro P520 graphics card. This is an entry-level graphics card for workstations. It is based on the Pascal architecture and does well when it comes to handling serious applications like Mastercam.

This is not even the best graphics card in the Quadro series and yet we chose this laptop because it comes with a price tag that is affordable for most users around the $1500 range. If you want high-end Quadro graphics cards, then your laptop will cost around $3000 which is a bit too steep.

The display on the Lenovo ThinkPad P53 is a 15.6″ one and it comes with a resolution of 1920 x 1080 pixels. The display has an IPS panel underneath and it comes with a good contrast ratio. The colors are realistic and you do get some deep blacks and bright whites, and also a satisfying grayscale performance.

The addition of a fingerprint reader is a nice touch. This Lenovo ThinkPad P53 is aimed at serious professionals and they will have a lot of sensitive data. Having a fingerprint reader will help encrypt those data which adds an additional layer of protection.

There is no lack of processing power with an Intel Core i7 processor in charge. This is a quad-core processor that comes with a maximum clock speed of 4.6GHz and delivers excellent performance when it comes to Mastercam.

With 24GB of RAM in the memory department, you should not have any problem when it comes to multitasking. This memory will be good enough for most people and you should have a fine experience with Mastercam. If you’re going to work on complex projects, then we would recommend adding another 8GB for the best experience. Otherwise, this is perfect.

Overall, the Lenovo ThinkPad P53 is a brilliant laptop. It comes with excellent hardware and does well when it comes to Mastercam making it the best laptop for Mastercam without costing you a lot of money.


Good hardware
Neat display
Fingerprint reader


Not very portable

View This Product On Amazon

Runner Up

Gigabyte Aero 15

  • Intel Core i7
  • 15.6″ UHD
  • 16GB DDR4
  • 512GB SSD

We earn a commission if you click this link and make a purchase at no additional cost to you

The Gigabyte Aero 15 is our runner up when looking for the best laptop for running Mastercam.

The Gigabyte Aero 15 is an excellent laptop that is great for gaming. But didn’t you say that gaming laptops may not be a good choice for Mastercam? We did, but this one is different. The Gigabyte Aero 15 brings an RTX GPU into play which does make an impact when it comes to handling an application like Mastercam.

The graphics card we have here is the Nvidia GeForce RTX 2070 graphics card and it comes with a dedicated memory of 6GB of GDDR6 memory. It also comes with support for Nvidia Optimus technology which is nice. When it comes to gaming, this thing just rips apart all games without any mercy. The GPU also does very well when you run Mastercam which is why we’ve included this laptop over another laptop with a Quadro GPU which would have been a bit more expensive.

Another show-stealer in this laptop is its display. We have a 4K display that comes with excellent colors and brilliant picture quality. It has super thin bezels that are only 0.11 inches thick. There is also a protective cover surrounding the bezel to protect the display when closing the laptop lid. The display also comes with X-Rite Pantone certification for color calibration.

Concerning processing power, we have an Intel Core i7 processor in charge of the performance. This is a high-end processor and it comes with excellent results. There are 16 gigs of RAM in the memory department and they do a solid job when it comes to handling Mastercam. The storage is also very fast as we have an SSD in place with a capacity of 512GB.

Overall, the Gigabyte Aero 15 is an excellent laptop. It comes with top-notch performance and you will have a hell of a time running an application like Mastercam which is why this is one of the best laptops for Mastercam in 2020.


Excellent display
Beastly performance
Awesome GPU


Slightly expensive

View This Product On Amazon

Honorable Mention

Acer Predator Helios 300

  • Intel Core i7
  • 15.6″ Full HD
  • 16GB DDR4
  • 512GB SSD

We earn a commission if you click this link and make a purchase at no additional cost to you

Update: We’ve upgraded our recommendation to the latest model that comes with a better processor and a much improved graphics card.

The Acer Predator Helios 300 is another gaming laptop that costs you a lot less. With this laptop, you can save a lot of money and will still be able to run Mastercam which is the goal. So if you’re on a budget, then this the laptop you should be going for.

The GPU in this laptop is the Nvidia GeForce GTX 1660Ti. This is an upper mid-range GPU from Nvidia and does well when it comes to Mastercam. The GPU is also excellent for running most modern games without any problems. You may have to reduce the settings a bit if you’re dealing with the latest and the greatest games.

The processor in the Acer Predator Helios 300 is an Intel Core i7 processor. This processor is from the 9th generation of Intel chips and it comes with 6-cores making it a good one for running Mastercam. The performance of the processor is nothing short of excellent and you’ll be super happy with your daily routine.

The 16GB RAM and the 512GB SSD are great performance boosters as well. They make sure that you don’t get any issues when dealing with Mastercam and that’s something. Along with the 1080p display we have on board, this Acer Predator Helios 300 model delivers a lot more with a smaller price tag.

Overall, the Acer Predator Helios 300 is an excellent gaming laptop that doesn’t break your bank. If you’re on a budget and looking for a laptop to run Mastercam without any problem, then this is the laptop to get.


Nice diplay
Excellent processor
Fast storage



View This Product On Amazon

What To Look For In The Best Laptop For Mastercam?

If you’re not satisfied with the models mentioned above and want to pick a laptop on your own, then we applaud your decision.

Here are some of the aspects you should not compromise on when looking for a laptop for Mastercam or similar software.

Processing Power

For running an application like Mastercam, you need ample processing power by your side.

At a minimum, you need a 64-bit processor from Intel or AMD that comes with a clock speed of 2.4GHz or more. Ideally, an Intel Core i7 processor or an Intel XEON processor with a clock speed of 3.2GHz or higher is required.

If you’re on a budget, you can stick with the minimum requirements. But to get the best Mastercam experience, going with a XEON processor is much recommended.

Choosing a high-end processor also means that it is going to have an adverse effect on the heat produced and also on the battery life of the laptop. Make sure the laptop comes with a good cooling system to give you an optimal performance.

How much memory do I need?

Technically, you should be able to run Mastercam with just 8 gigs of DDR4 RAM.

But you’ll need at least 16GB of DDR4 memory to experience a seamless Mastercam experience. The official site recommends 32 gigs of DDR4 RAM for the best experience.

If you’re on a budget, you can save some money by not going for 32GB RAM all the way. You can stick with 16GB for the time being and you can add more memory later when you can afford it.


Having a good display is much needed for Mastercam.

While you can get away with a 13.3″ laptop, we don’t recommend going with one as it is too small a display for what Mastercam does.

A 15.6″ display would be the right size for Mastercam and if you can find a 17.3″ laptop, it would be even better. You can also hook up a bigger external monitor to your laptop to get a better viewing experience.

What resolution works best for Mastercam?

At a minimum, you need a full HD resolution display. You can’t compromise on this even if you’re on a budget.

If you can afford it, go for a Quad HD or even an ultra HD display. More pixels mean better clarity and you can’t miss minor details on the screen even if you want to.

Also, having an IPS panel is crucial. An IPS panel gets you a good contrast ratio and also impacts the overall picture quality. It also brings you the best viewing angles which are very important when working with Mastercam.

If possible, do go with a matte display as it can help prevent distraction reflections on your screens even when you’re working in brightly lit areas.


For the best experience, Mastercam requires a workstation level graphics card like the Nvidia Quadro graphics card. These GPUs are best suited for handling applications like Mastercam and are much better than the GeForce models.

They are understandably more expensive and if you can’t afford them, you can always go for an Nvidia GeForce GPU. An equivalent AMD Radeon GPU will also be enough.

Even if you’re on a budget, do not settle for a laptop with an integrated graphics card. Mastercam and the Intel UHD graphics solutions do not go well and make up for a butchered experience.

At least, get a simple graphics card that is not all that expensive. It would still be miles better than the integrated offering from Intel.


The amount of storage you need depends on the type of work and the amount of work you’re going to do.

Most Mastercam users will be fine with 30 to 50 GB of free space.

But if you’re going to be dealing with huge libraries of files, then you are going to need a lot more storage than that.

Get at least a 256GB solid-state drive for storage. If you can afford it, go for the 512GB SSD.

Getting an SSD over an HDD is very important. The former is better is almost all the aspects and beats the latter fair and square. The SSD also brings excellent speeds and performance improvement across the board.

If you can’t afford a huge SSD, our recommendation would be to go for a hybrid drive. This drive would be made of both an SSD and an HDD. All your frequently used apps and the OS will be stored in the SSD while other data will be stored in the HDD. This setup is good for performance and won’t put a hole in your pocket at the same time.

Battery Life

Battery life is not that important when it comes to using Mastercam.

You’re going to be plugged in most of the time and you don’t have to worry about battery life.

If you’re someone who travels a lot, then battery life is important. In that case, get a laptop that comes with all-day battery life. This way you can work even when you’re on the go.


Having all the modern connectivity options is very important for a laptop running Mastercam.

Make sure your laptop comes with a USB Type C port as it is the latest and the greatest in the world of ports and offers a diverse set of functionalities under a single roof.

Having 802.11ac or 802.11ax Wi-FI will also be crucial for connecting to the internet. Bluetooth connectivity will surely come in handy and will help you with external connectivity.

Operating System

Mastercam is made for Windows so it goes without saying that you should be going for a Windows laptop.

But if you’re a mac enthusiast, you also have options. You can install Windows using Bootcamp or using virtualization software like Parallels.

This way you get to use the operating system of your choice while using the software of your choice as well.

That’s the end of this detailed post.

We believe you have gotten something out of this post and got to find the best laptop for your needs.

If you are still struggling to find a laptop, do let us know and we’ll sit with you to find the best notebook that suits your needs.

Also, visit the for more useful guides and reviews.

Leave a Comment